The product is in Ready mode, but nothing prints
1.
Print a configuration page, and verify the product functionality.
2.
Verify that all of the cables are correctly seated and within specifications. This includes the USB
and power cables. Try a new cable.
3.
Verify the IP address on the configuration page matches the IP address for the software port. Use
one of the following procedures:
Windows XP, Windows Server 2003, Windows Server 2008, and Windows Vista
a. Click Start.
b. Click Settings.
c.
Click Printers and Faxes (using the default Start menu view) or click Printers (using the
Classic Start menu view).
d. Right-click the product driver icon, and then select Properties.
e. Click the Ports tab, and then click Configure Port.
ENWW
Solve product software problems with Windows
227
f.
Verify the IP address, and then click OK or Cancel.
g. If the IP addresses are not the same, delete the driver, and reinstall the driver using the
correct IP address.
Windows 7
a. Click Start.
b. Click Devices and Printers.
c.
Right-click the product driver icon, and then select Printer properties.
d. Click the Ports tab, and then click Configure Port.
e. Verify the IP address, and then click OK or Cancel.
f.
If the IP addresses are not the same, delete the driver, and reinstall the driver using the
correct IP address.
228
Chapter 9 Solve problems
ENWW