Step 7: Test copy functionality
1.
Place the configuration page into the document feeder and make a copy. If paper does not feed
smoothly through the document feeder, you might need to clean the document feeder rollers and
separation pad. Make sure the paper meets specifications for this product.
2.
Place the configuration page onto the scanner glass and make a copy.
3.
If the print quality on the copied pages is not acceptable, clean the scanner glass and the small
glass strip.
CAUTION:
Do not use abrasives, acetone, benzene, ammonia, ethyl alcohol, or carbon
tetrachloride on any part of the product; these can damage the product. Do not place liquids
directly on the scanner glass. They might seep and damage the product.